View Single Post
Old March 25th, 2011, 16:26   #1
KBarlow
attention whore wants a custom title.
 
KBarlow's Avatar
 
Join Date: Jan 2011
Location: Kamloops, BC
G&G M4/GR16 Low ROF

My buddy just bought a G&G M4A1 and a metal receiver kit. I installed the receiver and put the gun together and tested it. The rate of fire seemed low, even with a 9.6v battery. Then I took the gun apart and checked the wiring and put it all back together again. Adjusted the motor height, but the ROF still seems low.

This is a brand new gun, so we didn't test it without the metal receiver. Is it possible that the ROF will increase as the gun becomes broken in?

The battery is a new 9.6v Tenergy nunchuck battery and is being charged by a Tenergy Universal Smart charger. I'm wondering if the battery is being fully charged. If I unplug the battery when the green light comes on and plug it back in, it will continue charging for another ten minutes or so before the green light comes back on again. If the battery is fully charged, would it not stop charging immediately after plugging it back in?

Thanks guys.
KBarlow is offline   Reply With Quote