Airsoft Canada - View Single Post - FAQ for Tokyo Marui Hi-Capa, 2011, 1911, MEU & Detonics type variants

chenmeister · April 22nd, 2011, 07:39

The 5.1 and 1911/MEU share the same chamber right? Some parts specify for 5.1 and some others specify for 5.1/1911 which gets me a bit confused.

http://www.airsoftglobal.com/shop/in...oducts_id=9942

This only states its for the 5.1 but it should also fit the 1911/MEU correct? I heard somewhere that some of SD's chambers with different thread grooving might not attach onto the straight barrels for the 1911:

http://www.airsoftglobal.com/shop/in...ducts_id=12966

I plan on using this for accurate target shooting < 350fps. A tanio koba twist barrel is my best bet right?

I'm liked the nineball dyna piston back when I had my hi capa 5.1 so I'm definitely going to be running that again. I heard the Airsoft Surgeon loading nozzle is a good fit with the dyna? Any recommendations on aftermarket loading nozzles other than AS? How about the floating valve? Anybody upgrade that too?

With a Nova long recoil rod, I would need the Nova type 3 rod plug and then it would fit with the stock barrel bushing right? I wouldn't have to also get the Nova Type 3 barrel bushing for everything to fit right.

thanks

April 22nd, 2011, 07:39	#1051
chenmeister Trader rating Join Date: Jun 2006 Location: u.s	The 5.1 and 1911/MEU share the same chamber right? Some parts specify for 5.1 and some others specify for 5.1/1911 which gets me a bit confused. http://www.airsoftglobal.com/shop/in...oducts_id=9942 This only states its for the 5.1 but it should also fit the 1911/MEU correct? I heard somewhere that some of SD's chambers with different thread grooving might not attach onto the straight barrels for the 1911: http://www.airsoftglobal.com/shop/in...ducts_id=12966 I plan on using this for accurate target shooting < 350fps. A tanio koba twist barrel is my best bet right? I'm liked the nineball dyna piston back when I had my hi capa 5.1 so I'm definitely going to be running that again. I heard the Airsoft Surgeon loading nozzle is a good fit with the dyna? Any recommendations on aftermarket loading nozzles other than AS? How about the floating valve? Anybody upgrade that too? With a Nova long recoil rod, I would need the Nova type 3 rod plug and then it would fit with the stock barrel bushing right? I wouldn't have to also get the Nova Type 3 barrel bushing for everything to fit right. thanks Last edited by chenmeister; April 22nd, 2011 at 08:28..