|
Check and make sure the spring that acts upon the cut off lever is their. and tighten the screw that holds the lever to the gearbox. If it's an upgraded gun what gear ratio/motor are you using?
I have awful problems with my guns cycling too fast for my taste. WIthout the trigger master my gun shoots 2-3 round bursts on semi with the lipo and auto is 1800RPM+ @ 420FPS. I solved it by using a trigger master.
I had the same problem with my CQB gearbox (Bone stock) but I solved that by running 7.4 lipo instead of the 11.1v that I prefer to use and being sure to firmly & fully pull the trigger, and shimming the cut off lever a little higher to better engage the sector nub.
__________________
Do you know what ruins airsoft?
(Chair), (Drama), (Air), (Sugar) softers, filthy casuals
---
Quote:
Originally Posted by mcguyver
it would appear I am not first up in this gang-bang
|
---
WANTED PTW Receiver PRIME, STG, Factory
|