View Single Post
Old May 9th, 2011, 17:23   #14
Azathoth
 
Azathoth's Avatar
 
Join Date: Feb 2008
Location: Red Deer
Quote:
Originally Posted by Conflicts6 View Post
Full metal tooth racks are not needed in standard builds. They are more expensive and don't really do anything for your build. They are most common in DSG setups because of the gear hardness. The best pistons and cheapest pistons on the market right now are the Super Shooter 7 Steel Teeth Clear Blue Piston and the SHS 7 Steel teeth piston. The shs piston being 8.50$ at ehobby and the super shooter I think is around ten.

To be honest, if you adjust your AOE on any piston (besides the some mentioned above which are utter crap, like the deepfire) it should last a long while.

Conflicts6
Those pistons are absolute garbage.

In my eyes a piston that can go 650 FPS for 10,000 rounds is a good piston. I tried the SHS "steel piston" with a M230 spring and the pickup lug, and first 3 teeth failed after 3 shots. My gears proceeded to eat the hunks of "metal" that came off the piston. Compare that to the 3 bags of 0.30's that Prometheus hard lasted with the M230 spring.

Granted not everyone needs or wants a gun that shoots 650fps but if want to spend the money to put a piston into a gun that can handle 650fps for several thousand rounds, I'm sure it will last at least that long on a properly shimmed box at your local club's energy limits
__________________
Do you know what ruins airsoft?
(Chair), (Drama), (Air), (Sugar) softers, filthy casuals
---
Quote:
Originally Posted by mcguyver View Post
it would appear I am not first up in this gang-bang
---
WANTED PTW Receiver PRIME, STG, Factory
Azathoth is offline   Reply With Quote