Airsoft Canada - View Single Post

Kampfer · May 19th, 2011, 05:03

Out of the 5 masada I've modified their metal piston tooth were the correct length... The only one that damaged the cylinder as you have described was due to a loose piston head (they didn't loctite these things)

I'd also encountered the piston wedging effect. (reinforced pistons are no no)
A switch debouncer circuit was used to solve the MOSFET Hiccup.
Started machining new nozzles out of Delrin to get a closer seal.
1 of the CQB barrel had a thicker paint job that interfered with the barrel clamping mechanism which caused lose seating and an FPS loss of 80.

Mind sharing what else works and what doesn't work with the PTS ACR mechbox?

PS
Switch info if anyone cares search up google: VMS15-01N pdf

May 19th, 2011, 05:03	#23
Kampfer Trader rating Join Date: Nov 2002 Location: Vancouver	Out of the 5 masada I've modified their metal piston tooth were the correct length... The only one that damaged the cylinder as you have described was due to a loose piston head (they didn't loctite these things) I'd also encountered the piston wedging effect. (reinforced pistons are no no) A switch debouncer circuit was used to solve the MOSFET Hiccup. Started machining new nozzles out of Delrin to get a closer seal. 1 of the CQB barrel had a thicker paint job that interfered with the barrel clamping mechanism which caused lose seating and an FPS loss of 80. Mind sharing what else works and what doesn't work with the PTS ACR mechbox? PS Switch info if anyone cares search up google: VMS15-01N pdf __________________ Op-for & BCAC clubs in and around Vancouver, BC www.MILSIG.ca Airsoft Source www.DSTactical.com Tactical Gears www.AirsoftGear.ca Parts, Accessories and Gaming Experience Last edited by Kampfer; May 19th, 2011 at 05:07..