Airsoft Canada - View Single Post

ScooterVauto · June 13th, 2011, 23:54

I have tried a few different M4 style hopups
I have the king arms one previously mentioned, I have used systemA and even a
cheapy metal one (god knows who made that one)
but recently I have been using the New modify units.
they come with 2 arms, one full (nubless) and one open.
I dont mind them But if you forget the little rubber oring under the gearset.
it will not hold the hopup setting.

I have a PDI 455mm TBB with a Guarder Black Rubber with a Modify Hopup chamber using the
Nubless arm (but gently dremeled to a Concave type of feel)
its a snug fit to get the barrel and rubber in.
they are very good together.

June 13th, 2011, 23:54	#8
ScooterVauto Trader rating Join Date: Jun 2010 Location: Edmonton	I have tried a few different M4 style hopups I have the king arms one previously mentioned, I have used systemA and even a cheapy metal one (god knows who made that one) but recently I have been using the New modify units. they come with 2 arms, one full (nubless) and one open. I dont mind them But if you forget the little rubber oring under the gearset. it will not hold the hopup setting. I have a PDI 455mm TBB with a Guarder Black Rubber with a Modify Hopup chamber using the Nubless arm (but gently dremeled to a Concave type of feel) its a snug fit to get the barrel and rubber in. they are very good together. __________________ A single Light is all one needs to find their way through the darkness, But a single BB is all you need to bring it on! ========== Im not worried about the Bullet that has my Name on it, Im worried about the bullet that says "to whom it may concern" Lt. Alexander Washington -(Red Tails 1944) Ret.