Quote:
Originally Posted by Reckless
is your cylinder ported? and if yes.. how big are the ports, where are the ports on the cylinder? ...
bearing spring guide and a cylinder with a small port or two closer to the piston end of the cylinder might not get 30fps .. but should bring you up 15 or 20 ...
this ofcourse is Assuming, that all your airseals are perfect (piston head oring, cylinder head seal, nozzle to cyl head, nozzle to hop rubber, hop rubber to barrel ) ..
depending on alll the factors above, and in some part barrel length ... that 110 should be capable of 380 without much issue...
|
No ports at all on the cylinder, its just the stock ICS m4 one (I have the CXP)
The gun was only gamed once or twice, I bought it from the forums practically brand new.
I actually did put a longer barrel in at 229mm.
I've received different results on .20g bbs on two different chronos, the first clocked me at 370fps, a month later without ever going back into the internals I was clocked at 350fps last week.