Quote:
Originally Posted by Remylebeau
Im just curious about the 20fps lost between chornos when no work was done on it between those two time periods.
|
Could it be the spring settling? I've heard of springs losing 20-25 FPS just through use because it "settles" after being used.
I would say an upgrade to a TBB and the compression unit to get a perfect airseal is what will do the trick depending on what you're already at to start with. ie. Putting in new compression parts to get 99% efficiency when you already get 95% efficiency in the stock compression parts isn't much of an upgrade, however going from a super leaky set that gets 70% efficiency to 99% efficiency is a huge upgrade and you'll see a really nice FPS gain and not really put additional wear on the parts from needing to use a higher power spring.