Airsoft Canada - View Single Post

Dethmetl · July 18th, 2011, 03:22

I have two of these clips

Airsoft M4/M16 300 Rd Polymer PDW Magazine Hi-Cap Mag

Both leak out the top, where the gas exits the mags (rectangular rubber), I don't think it's the O ring, but I'm not quite sure what todo about it, I've been told to try taking it apart and cleaning it, and I've done that with one of my other mags (below)

Though now it's in worse condition then before, though going into it blindly I knew I'd just use this one as practice.

Anyways, the two that concern me, one leaks very slightly, and the other is quite noticeable, any ideas?

July 18th, 2011, 03:22	#1
Dethmetl Trader rating Join Date: Jul 2011 Location: Ontario, Canada	Mags leaking propane gas I have two of these clips Airsoft M4/M16 300 Rd Polymer PDW Magazine Hi-Cap Mag Both leak out the top, where the gas exits the mags (rectangular rubber), I don't think it's the O ring, but I'm not quite sure what todo about it, I've been told to try taking it apart and cleaning it, and I've done that with one of my other mags (below) Though now it's in worse condition then before, though going into it blindly I knew I'd just use this one as practice. Anyways, the two that concern me, one leaks very slightly, and the other is quite noticeable, any ideas?