Airsoft Canada - View Single Post

H1TMAN · August 4th, 2011, 21:05

Salut Long_Bong,

Im gonna write in english for simplicity.

I just measure my PDI light outer barrel for VSR 10 and compared it to my stock TM G-Spec barrel.

The walls of the stock TM G-Spec outer barrel are sligthly thicker than those of the PDI outer barrel. The outside diameter of the PDI outer barrel is slighly thicker than the TM G-Spec Outer barrel. The diffrence in both cases is marginal. The barrel is strong, but it can be easily scrathed compared to the TM outer barrel

Im my case it was worth the investement because I want from inner barrel of 303 mm to 430 mm.

Your modification is cosmetic in nature and will not change the performance of the rifle, so ultimately you are the one that will have to determine if this cosmetic modification is worth the investment.

August 4th, 2011, 21:05	#2
H1TMAN formerly GRoy Trader rating Join Date: Dec 2008 Location: Angus, ON	Salut Long_Bong, Im gonna write in english for simplicity. I just measure my PDI light outer barrel for VSR 10 and compared it to my stock TM G-Spec barrel. The walls of the stock TM G-Spec outer barrel are sligthly thicker than those of the PDI outer barrel. The outside diameter of the PDI outer barrel is slighly thicker than the TM G-Spec Outer barrel. The diffrence in both cases is marginal. The barrel is strong, but it can be easily scrathed compared to the TM outer barrel Im my case it was worth the investement because I want from inner barrel of 303 mm to 430 mm. Your modification is cosmetic in nature and will not change the performance of the rifle, so ultimately you are the one that will have to determine if this cosmetic modification is worth the investment.