Airsoft Canada - View Single Post

CerberusNet · August 11th, 2011, 08:12

Have you checked the release valve for the misfiring mag? I had a sticky P226 valve and lubed it a bit where the inside pin/spring contacts the casing, prob solved for 226. There may be a small crack or leak in the lip causing the gas to flow outside the desired path...but you would notice all the extra gas coming from the bottom of the slide. Try loading the mags with the slide removed and compare alignment, one may be a few mm off..All the ideas I can come up with ATM...Good Luck!

August 11th, 2011, 08:12	#2
CerberusNet Trader rating Join Date: May 2008 Location: Belle River	Have you checked the release valve for the misfiring mag? I had a sticky P226 valve and lubed it a bit where the inside pin/spring contacts the casing, prob solved for 226. There may be a small crack or leak in the lip causing the gas to flow outside the desired path...but you would notice all the extra gas coming from the bottom of the slide. Try loading the mags with the slide removed and compare alignment, one may be a few mm off..All the ideas I can come up with ATM...Good Luck! __________________ Airsoft Armory Joe Burton President/C.E.O Avid Headhunter "Call me Sandman, I'll put em all to sleep."