Airsoft Canada - View Single Post

Tex · August 24th, 2011, 02:16

Shouldn't have any issues but if you do or you choose to run the stock spring you can.

If you look at the stock guide rod near the back there is a pin, hold the spring back punch that pin out to remove the end and the same end for most metal guide rods just unscrews then swap springs and done.

Edit; yes that tiny hole you saw there is a roll pin in it that's what you need to punch out.

August 24th, 2011, 02:16	#2
Tex Trader rating Join Date: Feb 2003 Location: Abbotsford, B.C.	Shouldn't have any issues but if you do or you choose to run the stock spring you can. If you look at the stock guide rod near the back there is a pin, hold the spring back punch that pin out to remove the end and the same end for most metal guide rods just unscrews then swap springs and done. Edit; yes that tiny hole you saw there is a roll pin in it that's what you need to punch out. __________________ W-69 _/\|