Airsoft Canada - View Single Post

Windows · August 29th, 2011, 19:13

Back when it was a "C" length it would do about 12" groupings at 80" with a tight bore. When I made the gun longer, I replaced the tight bore with the one mentioned above, and also changed the cylinder. To an non ported Modify one, and switched the bushings for bearings. This tightened it only a little to about 10" groupings. Cleaning the barrel, switching the awfull CA stock rubber and nub immediately tightened it up to 4" and switching from madbull to metal tech got me to a 1 inch grouping.(shot a friend's silencer at 50' on the first shot last game. Should have seen the look on his face)

August 29th, 2011, 19:13	#15
Windows Trader rating Join Date: May 2008 Location: Burnaby BC	Back when it was a "C" length it would do about 12" groupings at 80" with a tight bore. When I made the gun longer, I replaced the tight bore with the one mentioned above, and also changed the cylinder. To an non ported Modify one, and switched the bushings for bearings. This tightened it only a little to about 10" groupings. Cleaning the barrel, switching the awfull CA stock rubber and nub immediately tightened it up to 4" and switching from madbull to metal tech got me to a 1 inch grouping.(shot a friend's silencer at 50' on the first shot last game. Should have seen the look on his face) Last edited by Windows; August 29th, 2011 at 19:16..