|
Anyone had any problems with the bot lock after converting to open bolt? Once I converted, the bolt lock stopped working for all my mags.. I found that the bolt lol function on the mags are not pushing the bolt stop up far enough ... I put some epoxy on there, and it did the trick right away, but that got blown off after around 50 rounds. I compared the open bolt bolt stop to the closed bolt on and I noticed that the portion that is pushed up by the mag stop function is thinner than on the closed bolt one. Anyone have a similar issue? I'll try the epoxy again maybe I need to rough up the contact surface a bit more and let the epoxy dry longer...
__________________
|