Airsoft Canada - View Single Post

RacingManiac · November 8th, 2011, 18:54

Got a question about these, if you were to get a M4 stock tube adapter, like ones from Vltor:

http://www.vltorstore.com/products/A...k-Adapter.html

Will that work? For RS the Vltor one is stated to work with stamped AK receivers only, not the milled ones. On the same token, the rail system from Ultimak also have the same distinction:

http://ultimak.com/ACR2Long.htm

Does the GHK fit the spec for a stamped or milled receiver?

November 8th, 2011, 18:54	#8
RacingManiac Trader rating Join Date: Sep 2006 Location: Canada/US	Got a question about these, if you were to get a M4 stock tube adapter, like ones from Vltor: http://www.vltorstore.com/products/A...k-Adapter.html Will that work? For RS the Vltor one is stated to work with stamped AK receivers only, not the milled ones. On the same token, the rail system from Ultimak also have the same distinction: http://ultimak.com/ACR2Long.htm Does the GHK fit the spec for a stamped or milled receiver? __________________ My Arnies' Album My PBase Album Custom Pistol Whore...