Airsoft Canada - View Single Post

jareyes · November 22nd, 2011, 14:38

Hey all,

So I've been stuck on this problem for a few months now.

Essentially it is a TM P226 that will not cycle. With the OEM plastic body on it, it will cycle perfectly, lock back when empty, etc.

However, with a full metal body kit installed (GUARDER), the gun refuses to cycle fully.
On a charge of gas, the gun will cycle consistently, it just won't cycle back completely to lock the slide back. It will, however, cycle enough to reset the hammer.

It's had the full metal body kit, as well as the following additions:
- 150% recoil and hammer spring set
- Hi-flow valve in mags
- Action power bulb set (includes rocket valve and piston with o-ring)
- extended spring for the rocket valve

I'm pretty stumped, any and all advice would be greatly appreciated. Thanks in advance.

November 22nd, 2011, 14:38	#1
jareyes Trader rating Join Date: Nov 2008 Location: Toronto	TM P226 with FMK Not Cycling Properly Hey all, So I've been stuck on this problem for a few months now. Essentially it is a TM P226 that will not cycle. With the OEM plastic body on it, it will cycle perfectly, lock back when empty, etc. However, with a full metal body kit installed (GUARDER), the gun refuses to cycle fully. On a charge of gas, the gun will cycle consistently, it just won't cycle back completely to lock the slide back. It will, however, cycle enough to reset the hammer. It's had the full metal body kit, as well as the following additions: - 150% recoil and hammer spring set - Hi-flow valve in mags - Action power bulb set (includes rocket valve and piston with o-ring) - extended spring for the rocket valve I'm pretty stumped, any and all advice would be greatly appreciated. Thanks in advance.