Airsoft Canada - View Single Post

MaciekA · November 22nd, 2011, 19:05

I have the PDW in the picture and while the rail in question is loosely similar, a lot of the PDW's uniqueness comes from the fact that the rail is part of the upper, whereas the pictured rail is clearly two pieces.

If it's claimed to be a 416 rail, I'm guessing it's also much bigger. I've also noticed on 416 rails and uppers that I've seen that the rail is raised quite a big height off the receiver compared to an m4, whereas the PDW is much closer to an M4 height.

November 22nd, 2011, 19:05	#3
MaciekA Trader rating Join Date: Jun 2011 Location: Portland, Oregon, USA	I have the PDW in the picture and while the rail in question is loosely similar, a lot of the PDW's uniqueness comes from the fact that the rail is part of the upper, whereas the pictured rail is clearly two pieces. If it's claimed to be a 416 rail, I'm guessing it's also much bigger. I've also noticed on 416 rails and uppers that I've seen that the rail is raised quite a big height off the receiver compared to an m4, whereas the PDW is much closer to an M4 height.