Airsoft Canada - View Single Post - Spring Comparison Chart

Dynamo · November 23rd, 2011, 06:01

well like i said in the post above, there is no compression issue, the pistol stops and doesnt move forward if i plug the end of the barrel with my thumb. the ports on these cylinders are fairly large, easily 1/4 inch diameter, and 1/2 long. i also checked to make sure the piston sides were not scraping the sides of the gearbox. with no spring the piston slides freely.

November 23rd, 2011, 06:01	#174
Dynamo Harvester of Noobs' Sorrow Trader rating Join Date: Oct 2003 Location: T̆͒ͥ̓̿̅̈́̐͊̿͗̐̾̃͐ͧ&#8	well like i said in the post above, there is no compression issue, the pistol stops and doesnt move forward if i plug the end of the barrel with my thumb. the ports on these cylinders are fairly large, easily 1/4 inch diameter, and 1/2 long. i also checked to make sure the piston sides were not scraping the sides of the gearbox. with no spring the piston slides freely. __________________ Weapons Technician / Gunsmith Don't look at me, I don't know, lol ¯\(°_o)/¯.