Airsoft Canada - View Single Post

XZIVR · November 24th, 2011, 21:25

okay, video didnt work out well but here's a high ass resolution picture of it: http://img228.imageshack.us/img228/8643/imgp0587.jpg

Sorry for the shitty focal length, only lens I had handy..

Anyhow, just for kicks I put the piston in part way as shown in the pic and tried to close the gearbox. Couldnt even get it closed.. It's actually touching the flat portion of the sector gear and when I try to close it up like that, it pushes the sector gear down and then the bearings dont line up.

So yeah, definitely seems like the teeth are just too low. It's like this on the Modify 22.2:1 torque up gears and the King Arms 18:1 normal torque gears.

Did I just get a bad piston.. or.. something? Or does SRC use non-standard pistons with shorter teeth......?

November 24th, 2011, 21:25	#18
XZIVR Trader rating Join Date: Mar 2011 Location: Calgary, AB	okay, video didnt work out well but here's a high ass resolution picture of it: http://img228.imageshack.us/img228/8643/imgp0587.jpg Sorry for the shitty focal length, only lens I had handy.. Anyhow, just for kicks I put the piston in part way as shown in the pic and tried to close the gearbox. Couldnt even get it closed.. It's actually touching the flat portion of the sector gear and when I try to close it up like that, it pushes the sector gear down and then the bearings dont line up. So yeah, definitely seems like the teeth are just too low. It's like this on the Modify 22.2:1 torque up gears and the King Arms 18:1 normal torque gears. Did I just get a bad piston.. or.. something? Or does SRC use non-standard pistons with shorter teeth......?