Airsoft Canada - View Single Post - Gearbox seizure and selector lever problem.

89db · February 3rd, 2012, 10:30

Thanks, I researched on Shimming, and I will again (normally I read 1000 articles before engaging the project to be sure I dont miss anything).

I was surprised that there was no shims in place (but no surprising since my gun is an entry level on, the gearbox is from a VA gun, its the black one with metal bushings and a M120 Spring)

So I'll call torontoairsoft see if they have shims in stock so I can do go pick them up.

and for the Trigger/Lever problem? did it happened to anybody? probably easy to fix, maybe when I ll reassemble my box it ll be fix.

***EDIT***

My battery is charged now but havn't retried... I reopened the box. Will retest once I shimmed it properly.

February 3rd, 2012, 10:30	#7
89db Trader rating Join Date: Jan 2012 Location: Toronto, Ontario	Thanks, I researched on Shimming, and I will again (normally I read 1000 articles before engaging the project to be sure I dont miss anything). I was surprised that there was no shims in place (but no surprising since my gun is an entry level on, the gearbox is from a VA gun, its the black one with metal bushings and a M120 Spring) So I'll call torontoairsoft see if they have shims in stock so I can do go pick them up. and for the Trigger/Lever problem? did it happened to anybody? probably easy to fix, maybe when I ll reassemble my box it ll be fix. *EDIT* My battery is charged now but havn't retried... I reopened the box. Will retest once I shimmed it properly. Last edited by 89db; February 3rd, 2012 at 10:34..