Quote:
Originally Posted by GabeGuitarded
I'm also having problems with the bolt catch engaging the bolt on empty. The only time it catches in time is when the magazine is low on gas or cooled down significantly enough to slow the cycle. Will filing the bolt catch as I've seen in searching around make it engage quick enough? If so I need a bit of guidance on how to get that part out of the receiver.
|
First inspect the nub that triggers the bolt catch on the magazine that's activated by the BB follower. It could be worn/re-assembled incorrcetly/not engaged. If there is no issue with the mechanical workings on the magazines, take the bolt out and inspect the white plastic alligner that keeps the nozzel centered. It should be as far back as possible and a small hole should be visible just infront of it. If not slide it all the way back and secure it there by running some duct tape infront of it. This piece tends to wander, and after moving it to where it should be fixed all the issues with my gun, including the bolt catch not engaging.
Hope that helps!