|
the "not compatible part is the ICS is the delta cap (front), the ring is fine.
I picked up a used RIS on the boards for $15 and it fits no prob with a G&G (or other "milspec" sized brand [look for the larger 90* cutouts at the bottom of the ring]) delta cap and a lot stiffer/solid than the stock set up. the screw hole in the delta cap is larger than the ICS, but the ISC screw head matched the dimensions of the whole for me. compression fit kept it tight.
depending on the version of your M4 either the fore site of the barrel will have a screw to adjust for the difference in length.
if your M4 is forward wired you have only 1 choice of battery that I'm confident will fit (ordered 2 from hobbyking.com will try to remember to post a confirmation of fit here) a Turnigy 7.4 1200 mah lipo, they have a couple 7.4/1200, you need the one with the smallest dimensions
Turnigy nano-tech 1200mah 2S 15~25C Lipo AIRSOFT Pack Turnigy nano-tech 1200mah 2S 15~25C Lipo AIRSOFT Pack
Spec.
Capacity: 1200mAh
Voltage: 2S1P / 2S Cell / 7.4V
Discharge: 15C Constant / 25C Burst
Weight: 68.1g (including wire, plug & case)
Dimensions: 125x6x20mm (Each)
Balance Plug: JST-XH
Discharge Plug: Mini-Tamiya (Mini Molex)
|