Quote:
Originally Posted by N_Force
regarding the gas mag leak, here is something I would like to share.
release valve has 3 o-ring, 2 large are for sealing the mag and the small is for gas release use. as of my experience, leaking is coming from the gas release one causes by the spring is a bit too weak to hold on position. couldn't find out how to fix but you can use a tool to slightly pull it up and slightly turn it a bit, if the leak stops, that is the same problem as I have. also make sure not damage it.
be careful, don't damage it.
 |
I don't even know what the problem is, I tried your method to fix it but it doesn't help much. When the mag is under near full pressure it starts to leak a little.
I'll need to find some how to disassemble the mag to get to that valve.