Airsoft Canada - View Single Post

MaciekA · March 12th, 2012, 17:59

p.s. Yes, you WILL need to force that plate off the switch so that you can see the hex screw, but just take your time.. You don't really need to put it back on after.

March 12th, 2012, 17:59	#11
MaciekA Trader rating Join Date: Jun 2011 Location: Portland, Oregon, USA	p.s. Yes, you WILL need to force that plate off the switch so that you can see the hex screw, but just take your time.. You don't really need to put it back on after. __________________ "Mah check" Now you know