Quote:
Originally Posted by xl1
hi Brian, what is a possibility cause if in CNC frame the disconnector (long one) cannot pull back to normal, it seems stuck with the hammer sear, if i open the beaver tail and push the disconnector a bit then it will be back to normal position.
using CP frame, with TM stock disconnector and grip. is change to the steel disconnector will solve the problem?
many thanks
andy
|
Andy,
Apologies on delay to respond. I've been out of the country for the past 3 weeks with no solid internet connection. I'm just catching up with inquiries and a massive pile of PM's right now.
Regarding the disconnector... unsure of the actual problem - I'm not sure I fully understand your description. Pictures speak a thousand words. But from what I gather, it sounds like you're saying the disconnector isn't able to slip behind the sear.
If you find that applying a bit of forward pressure to it will fix it, then chances are, all you have to is increase the forward pressure of the leaf spring's right most prong.
Brian