Airsoft Canada - View Single Post

Jimski · April 15th, 2012, 21:24

this is an aluminium piston;

anyone knows why it broke at the first tooth like that ?
the battery I used was 10.8V / 5000 mAh, the spring is under 350 fps.

does it mean that the piston breaks when the sector gear catches it ?
1.I suffered some misfeed the mag before the failure, but not on the mag during the failure, that was spitting BBs like there was no tomorrow.
2.When I took it apart there were two bbs jammed in the barrel.
3.BBs are Bastard tracers.
do you think a plastic piston will explode into a million pieces if I try it on this config ?
is that clearly jamming-related?
thx all

April 15th, 2012, 21:24	#1
Jimski Trader rating Join Date: Jun 2005 Location: Montreal	interesting piston failure this is an aluminium piston; anyone knows why it broke at the first tooth like that ? the battery I used was 10.8V / 5000 mAh, the spring is under 350 fps. does it mean that the piston breaks when the sector gear catches it ? 1.I suffered some misfeed the mag before the failure, but not on the mag during the failure, that was spitting BBs like there was no tomorrow. 2.When I took it apart there were two bbs jammed in the barrel. 3.BBs are Bastard tracers. do you think a plastic piston will explode into a million pieces if I try it on this config ? is that clearly jamming-related? thx all __________________ Last edited by Jimski; April 15th, 2012 at 21:27..