Quote:
Originally Posted by Shift77x
Only tried the old motor with the old gearbox. Just the pistol grip installed is a good idea. ive been doing the same thing pretty much just had the lower on it is all. My battery is a 10.8v 5000mah so i dont think its the problem although it could be, I think its a piece of crap so il fully charge but before next run and I might try to throw in the old motor and see what that does. I already have deans connectors on it and when i was trying it i had it in semi so il try full auto. Thx for the help il let you know what happens.
|
OK, this all sounds decent. You need to make sure you rule out the battery somehow, it could just be low/etc.
My bet is that the motor is sitting too high in the grip, and if you lower it a little bit (I like to go by quarter turns of the motor height adjustment screw and fire a semi shot between each turn) at some point it'll suddenly start turning. It'll probably screech at first since it'll still be too high, but low enough to move the bevel gear.. After that, lower a little more until it sounds "nice" (hard to qualify... but not screechy).