mechbox is shimmed nicely, gears spin freely with little to no wobble. motor height is good no whining or grinding. as for the gauge of the wiring it came with 18 awg rated for 200 degree wiring. it's the newest version from ascu. heres a link of the mosfet :
http://www.airsoftgi.com/product_inf...oducts_id=9191
if need be i can re-wire it to deans, but as of now it's wired to a small tammy. would re-soldering the board to low resistance wiring help? i mean it says it's rated up to 12v.