Airsoft Canada - View Single Post - FAQ for Tokyo Marui Hi-Capa, 2011, 1911, MEU & Detonics type variants

jordan7831 · July 27th, 2012, 15:33

Hello,

I have a problem concerning a hicapa 5.1 I own.

It keeps breaking loading nozzles. I have put two shooters design nozzles in there and each time they keep cracking down the middle.

The gun has a pdi(?) piston head, SD kimber slide, and high flow valves in the mag, and AIP short stroke kit.

Any thoughts?

Thank you,

Jordan

EDIT: Solved. Hurr de durrr guy I bought it from installed the piston head backwards. Thus when the nozzle would return it would smack into the piston head.

But for future reference what would cause a problem like that to happen?

July 27th, 2012, 15:33	#1526
jordan7831 will always be Mike Litoris in our hearts Trader rating Join Date: Jul 2004 Location: North York - Toronto	Hello, I have a problem concerning a hicapa 5.1 I own. It keeps breaking loading nozzles. I have put two shooters design nozzles in there and each time they keep cracking down the middle. The gun has a pdi(?) piston head, SD kimber slide, and high flow valves in the mag, and AIP short stroke kit. Any thoughts? Thank you, Jordan EDIT: Solved. Hurr de durrr guy I bought it from installed the piston head backwards. Thus when the nozzle would return it would smack into the piston head. But for future reference what would cause a problem like that to happen? Last edited by jordan7831; July 30th, 2012 at 15:03..