Quote:
Originally Posted by Renegade)
I had one, and had some minor problems with it, wouldnt keep it setting with mag changes, barrel seal loss..
I switched over to a Modify Accurate hop, and havnt looked back since. Highly recommend the Modify.
|
I can't say that I agree.
I recently (today) did extensive testing of various hop-up units. In the group were: VFC, G&P, Lonex, Modify, King Arms, Madbull and some random no-name units (some of which were plastic)
Rubbers tried were: G&P, Lonex, Madbull, Prometheus, KM RH65, PDI W-Hold, KWA 2GX and a smattering of no-name rubbers.
When put head-to-head against a G&P and Lonex unit, the Modify yielded lower fps - 20-40 fps less. This was tested with 2 different platforms (350fps and 450fps)
All other testing conditions were equal (nozzle, hop-up rubber, nub, inner barrel, ammo, gearbox, etc). We also tried swapping rubbers to others to yield higher fps but the Modify unit yielded less every time. Having said that though, VFC, Madbull and King Arms were kinda junky too. The plastic units all failed miserably.
Having said that, the Modify did yield the most CONSISTENT fps.