[Stealth]

I've been using both the complete and the Lonex shell for the entirety of this past season and haven't had any issues. We've also been hearing positive things from the other clients who have purchased the box. I think the Modify one is a bit beefier while the Lonex one is a bit more slim and "TM-spec" as HKGhost has said so it does make for installation a bit easier into a variety of bodies. I know the Modify shell doesn't work on my Systema (old school) metal body without a lot of "coaxing".

We did get a report of the trigger post snapping on one of the mechboxes but that seemed to be an isolated incident. We're currently following up with Lonex on that to ensure that we don't get any of that batch and to also make sure that they pay special attention to that area.

I know the box can take an M170 spring on a DSG setup without issue (of course, you'd have to swiss-cheese the piston, and a bunch of other things). John has it setup with an M150 single stroke setup, and I have had a variety of springs in it from M100s up to M140s. So the Lonex box will laugh at an M90 spring.

I'll be doing another DSG setup on it soon with RiotSC gears, but if you're looking for something that's a good base from which to build up from, this box is up there.