View Single Post
Old November 6th, 2012, 12:17   #12
Azathoth
 
Azathoth's Avatar
 
Join Date: Feb 2008
Location: Red Deer
Quote:
Originally Posted by Adamlxlx View Post
I have 2 hot powers. One 7.4 and another 11.1. Just got the 11.1 but have had the 7.4 for 4 years zero problem. Azathoth, what voltage did you store yours at? I have been using lipo for 5years and have never had one fail or puff up on me
I have a quality charger, I took the batteries out of the package and tested the voltage of each cell through the balancing lead.

Charged the batteries to 4.2xx each cell on the 11.1 and 7.4 and put them into the respective guns. Ran the batteries, at the end of the day i check the voltage on the batteries and ensure they are above 3.3v. I had a lipo cutoff on a alpha version of the Trigger master v3.9, it cuts off at approximately 3.3v each cell. At the end of the day if the batteries voltage range was 3.3v - 3.8v / cell I put them away and will charge them before the next game. The one 7.4 battery didn't live beyond it's first charge cycle and use on a stock TM gearbox (v6). The 11.1 lasted perhaps a month or about 5-6 charge cycles in my M4.

Once you move away from those awful buffer lipo to a nice brick style you never go back. 12-15c providing a continuous amperage of ~25-30 is really anemic.

I've had several LIPOs go puffy after RC use on helicopters / planes but that took several 6-8 months of using the battery hard.
__________________
Do you know what ruins airsoft?
(Chair), (Drama), (Air), (Sugar) softers, filthy casuals
---
Quote:
Originally Posted by mcguyver View Post
it would appear I am not first up in this gang-bang
---
WANTED PTW Receiver PRIME, STG, Factory
Azathoth is offline   Reply With Quote