Quote:
Originally Posted by cetane
My cqd has the same arrangement. To pull the nut off, loosen the outer nut & take rail off. Take a screw driver and pull out the gas tube screw. Should have a slot in it. It's threaded to barrel nut iirc. Once out put the rail back on with those floating pins & unscrew the entire assembly from the upper receiver.
|
So the outer nut should just unscrew freely as it is? That's the first step?
If so, what direction does it thread off, because I tried that, and got no result. Admittedly I didn't try very HARD because I didn't want to risk breaking anything if I was doing it wrong....