Quote:
Originally Posted by Bar1975
This is an MP5K.. there is very little room in this thing for thicker wires.. lipos..
do they even make a stick type lipo to fit in guns like this?
The gun itself was only $100 brand new.. i should have stopped with the upgrades a long time ago.. i just got carried away
|
This should fit and work great.
http://www.airsoftstore.ca/index.php...roducts_id=194
There are 3 things you can never skimp on if you want a great working shooter
1) Quality Battery, not all batteries are equal, different batteris of the same voltage from different suppliers can operate drastically different. A stock 9.6 battery that is supplied with any gun when you buy it is the lowest quality battery you can get, throw it away and get a proven one, you will notice the difference immediately (high c lipo or a stick with sanyo or intellect cells)
2) Quality motor (lonex orange), go with the best and you never have any issues, I cannot stress how important it is, more horespower and speed the better regardless if it is used to its full capacity
3) Solid piston, forget about the swiss cheesing and lightening everything. I use the piston bearings and bearing spring guides on all my guns with the lonex tough piston in stock format with quality 11.1v lipos (20c, 25c, and 65c) and they are all super fast from 350fps all the way up to 450 FPS.
I use all different gear sets from 13.1 to 18:1 using all the same components mentioned above just changing the gear ratios and springs.
Don't over think, with the added investment of say $80 dollars your can achieve everything you want with a $100 base gun.