Quote:
Originally Posted by pounce_the_jaguar
We all got nagants, that's all that matters in the end.
It's worth a shot but it's permanent so maybe hold off. I was thinking of cracking it open and seeing if I can't install a weaker hammer spring. That shouldn't vent as much gas. To bad there isn't a hop up on the thing.
|
Problem is, there isn't a hammer spring according to the diagram on the box. So either the diagram is missing a part, or the spring that holds the trigger also somehow pushes the hammer.
If you look at the valve diagram, it could be possible to change the valve spring for a stiffer or slightly longer one. Or maybe putting some shims in the valve assembly near part 7-10.