Airsoft Canada - View Single Post

wildcard · March 12th, 2013, 18:57

Check out PTW forums It might be from one those crazy German (My bad it's actually Danish) that did a small batch of CNC receivers a while ago (before Prime or FCC) and he wanted something insane like 600Euros or something like that. If I remember correctly these bodies were slightly larger/thicker than the OEM Systema and the internal of the lower is a very tight fight so much so that a littl ebrute force is needed to tap the Mech box in.

March 12th, 2013, 18:57	#2
wildcard Trader rating Join Date: Dec 2001 Location: In my man cave	Check out PTW forums It might be from one those crazy German (My bad it's actually Danish) that did a small batch of CNC receivers a while ago (before Prime or FCC) and he wanted something insane like 600Euros or something like that. If I remember correctly these bodies were slightly larger/thicker than the OEM Systema and the internal of the lower is a very tight fight so much so that a littl ebrute force is needed to tap the Mech box in. Last edited by wildcard; March 12th, 2013 at 21:03..