[Ron-E]

To Clarify things:
This mod was in no way intended for field play. Just me screwing around, new r-hop installation, testing bb weights, spare time dicking around. FPS limits are always respected wherever I go. The intended reason for this post is to find out why my motor is disintegrating itself lol


Hi there,
Today I was shooting around testing different weight bbs when all of a sudden my gun stopped shooting. At first I thought it was the battery but I put a freshly charged one in and shot a few times then nothing. I'm currently using 11.1 lipos (1400mah, 20C), merf3.2, Lonex-A2 motor, Modify M150s spring, stock G&G torque-up gears, Prometheus red piston, G&G stock piston head (commando max top tech gun, nice compression), angle of engagement corrected, sorbo pad in, shooting .20s at around 500fps, last ROF test gave me 22rps (used to be around 27rps). Do you think Active Breaking from the Mosfet is killing my motor??? I'm attaching a few pictures of what it looked like when I pulled it out of the pistol grip. Whenever the gun stopped shooting I looked at the mosfet and it acted as if I had unplugged the motor and entered into configuration mode. I pulled all the wires off, then back together and shot a few rounds then same thing happened, it entered configuration mode (blinking led). I'm not sure what to do here....any input would be very much appreciated. PLEASE HELP!! Thank you

-Rene