The thickness of a sorbo pad really won't change your cylinder volume THAT much, as long as you're removing the stock pad and only adding enough to correct AoE. You're only losing the slightest bit, translating to maybe 20 or 30 mm of barrel length which is nothing.
Quote:
Originally Posted by Hectic
Ive been running the stock cylender (4/5 port) with a 455mm inner.
Im going to be putting a thicker sorbo pad so now ill likely be running short on cylender volume for the barrel. You think i should swap in a full cylender to combat this?
Was looking at the modify enhanced cylender for 450-590 inners thatll leave me room to put in a longer inner for my dmr build that im going for with this gun.
 |