|
If a bend doesnt work, some mechboxes the damn thing just wont stay in, assemble with the long part of the spring on the outside of the box, and the trigger seats normal. Then close up the mechbox as normal, but before you add screws, just open the bottom part up a hair so that you can lift up the trigger spring, and pop it on the inside of the mechbox.
Had do to that with I think a Modify Torus I was working on.
Also, to manage the spring guide and spring better, use the screw out of a stock, that screws into the guide anyways, to help hold it, better than a screw driver.
__________________
W1-5
|