Airsoft Canada - View Single Post

MALTV · May 29th, 2013, 00:13

Hey everyone, I currently switched V2 gear boxes (both are from the exact same G&G model gun) and when I put the whole thing back together and went to pull the trigger. The air nozzle would go back slightly and then nothing. I pull the trigger and all that will happen is the motor will try to turn the gears but they won't budge. I just get this clicking sound coming from the gears from the motor trying to move them. I've tried re shimming the gears and every time I do a test to make sure the gears rotate by using my finger to roll the gears there fine. But as soon as I put everything else back in with it the gun just freezes up after one pull of the trigger. Any help would be greatly appreciated.

May 29th, 2013, 00:13	#1
MALTV Trader rating Join Date: Dec 2008 Location: St. John's, NL	G&G M4 gears jamming Hey everyone, I currently switched V2 gear boxes (both are from the exact same G&G model gun) and when I put the whole thing back together and went to pull the trigger. The air nozzle would go back slightly and then nothing. I pull the trigger and all that will happen is the motor will try to turn the gears but they won't budge. I just get this clicking sound coming from the gears from the motor trying to move them. I've tried re shimming the gears and every time I do a test to make sure the gears rotate by using my finger to roll the gears there fine. But as soon as I put everything else back in with it the gun just freezes up after one pull of the trigger. Any help would be greatly appreciated.