[Hectic]

It is shimmed well (at least as well as can be in the crappy shell)
Im a lil OCD, okay alot OCD and i spent over an hour shimming tested it out and still wasnt happy and tore it all apart and shimmed the damn thing again (moving the one troublesome bushing i spoke of earlier) and spending nearly an hour shimming it agin till i was satisfied.
I was impressed by the wires in this gun they are alrdy 16 or 18 (not quite sure ill take another look but ill go over to that silver type stuff you sell Stealth as i think i still have enough of it around. Will also remove the tamiya connector and just run a lil extra length to assist in removing the gearbox as oppsed to the connector.
I will likely have to go poly for a piston head as i said befor about my parts guy not having POM as i figure aluminium will be too heavy.
I have ample room for a fet just not a battery (its just the way the sd handguard is set up so i guess ima have to go over to lipos then to take advantage of a high rof build if my other efforts dont pan out.

Is a ploy head really that bad?
So motor (is a lonex A1 okay for this?)
Shell (lonex so ill have bearing and a much smoother finnish inside and beter fitment of parts for ease of install)
And ill try n reduce a lil more weight off the piston and see how that does me.
Im greatfull for any further input. Thanks guys!