|
Sorry for reviving the dead but is there any tips for preparing the reciever for the pdi cylinder set? I asked about it and says it's fine w/o the guides but it really irks me to have metal to metal w/o smooth finishes....
Option1
Polish the inner receiver and debur faults. The problem is it's a 2 piece assembly so if it were to be separated again it won't be flush at the seems....
Option 2
Bore out the Receiver and plant a sleeve/bore with cut outs or insert teflon tape around
Option 3
Buy the PDI Receiver which is pricy but i don't think it's polished internal ID but at least it comes with the inner ring
|