Airsoft Canada - View Single Post - SIG 552 hi-cap not feeding

nutboi · August 20th, 2005, 01:56

i had the same prob too. sometimes it would shooot but usually at the start of the clip it would jamm correct?

i took my hi cap apart and found at the bottom of the mag by the winding mech where the bb feed up that there's a notch or a small space in the feeding tube. i ended covering that notch with a small piece of paper and some tape and now my gun fire flawlessly. try that. if now the i would shoot some silicone oil in the mag and try it again.

August 20th, 2005, 01:56	#10
nutboi Trader rating Join Date: Apr 2005 Location: richmond bc	i had the same prob too. sometimes it would shooot but usually at the start of the clip it would jamm correct? i took my hi cap apart and found at the bottom of the mag by the winding mech where the bb feed up that there's a notch or a small space in the feeding tube. i ended covering that notch with a small piece of paper and some tape and now my gun fire flawlessly. try that. if now the i would shoot some silicone oil in the mag and try it again.