Airsoft Canada - View Single Post

Oteck · August 12th, 2013, 18:54

I know there's alot of reading and catching up to do so hope you guys cut me some slack since i came late into this game you called airsoft

A little background about me. Im a nerd, gear head, spec geek, you name it.
I love modifying things in the hopes to improve designs. See links on my Mr2 projects if your curious. I do alot of CAD and rnd
1991 MR2 3.3L V6 Conversion | Six speed conversion | Lexus LS430 Big brake conversoin

First off i'd like to discuss the possible things doable to this gun outside the range of bolt on's like PDI/Laylax specific parts. I'd like to indulge im hybrid mockery like taking the best of everything and make it work like implementing a VSR-10 hopup chamber and such not designed for it but make work arounds. If anyone willing to donate original part off their vsr i'll be more than willing to take it off your hands

Fun things i'd like to try may it be cosmetic or minor improvements. Generally ideas i have floating in my head but before any of that i'm going to spend some more time with mr. vernier caliper tool to outright CAD the whole design

PDI L96 Bull base barrel with PDI VSR-10 outher L bull barrel
This setup sure to make the gun really long so your looking into a 624mm long inner barrel. Who the heck can cut you one is beyond me (custom EDGI or use a PSG1 AEG 660mm barrel).

I know this has been discussed to death on other form regarding weather it's beneficial or not but i like to test things even if it cost $$.
things like 500mm vs 660mm in 6 .01-.03-.05 for each while also trying out all possible weights (.25g and above)

Hopup adjuster plate
This part of the gun irks me the most because it's where the plastic is the least connected so it creaks when you squeeze it. I'm designing a lower plate made of aluminum that will use the 2 unused mounts to secure it.
There is alot of possibility with this as it can be a basis for a custom hopup

Solid stock
Another of my irritants is the 2 piece stock, id love to get a spare just to glue together (anyone willing to sell me one?

) so it can be a solid one piece. As is im tempted to plastidip the whole thing to make it more gripy or make a mold out of it and make a CF or FG one. Theres also a chance to incorporate a monopod at the butt end too

August 12th, 2013, 18:54	#1
Oteck Trader rating Join Date: Aug 2013 Location: New Westminister B.C.	TM L96 AWS possible mods I know there's alot of reading and catching up to do so hope you guys cut me some slack since i came late into this game you called airsoft A little background about me. Im a nerd, gear head, spec geek, you name it. I love modifying things in the hopes to improve designs. See links on my Mr2 projects if your curious. I do alot of CAD and rnd 1991 MR2 3.3L V6 Conversion \| Six speed conversion \| Lexus LS430 Big brake conversoin First off i'd like to discuss the possible things doable to this gun outside the range of bolt on's like PDI/Laylax specific parts. I'd like to indulge im hybrid mockery like taking the best of everything and make it work like implementing a VSR-10 hopup chamber and such not designed for it but make work arounds. If anyone willing to donate original part off their vsr i'll be more than willing to take it off your hands Fun things i'd like to try may it be cosmetic or minor improvements. Generally ideas i have floating in my head but before any of that i'm going to spend some more time with mr. vernier caliper tool to outright CAD the whole design PDI L96 Bull base barrel with PDI VSR-10 outher L bull barrel This setup sure to make the gun really long so your looking into a 624mm long inner barrel. Who the heck can cut you one is beyond me (custom EDGI or use a PSG1 AEG 660mm barrel). I know this has been discussed to death on other form regarding weather it's beneficial or not but i like to test things even if it cost $$. things like 500mm vs 660mm in 6 .01-.03-.05 for each while also trying out all possible weights (.25g and above) Hopup adjuster plate This part of the gun irks me the most because it's where the plastic is the least connected so it creaks when you squeeze it. I'm designing a lower plate made of aluminum that will use the 2 unused mounts to secure it. There is alot of possibility with this as it can be a basis for a custom hopup Solid stock Another of my irritants is the 2 piece stock, id love to get a spare just to glue together (anyone willing to sell me one? ) so it can be a solid one piece. As is im tempted to plastidip the whole thing to make it more gripy or make a mold out of it and make a CF or FG one. Theres also a chance to incorporate a monopod at the butt end too Last edited by Oteck; August 12th, 2013 at 18:57..