Airsoft Canada - View Single Post - C-TAC CT36k spring help.

lurkingknight · September 22nd, 2013, 21:06

more than likely a 120 spring with a bit of an air leak.

If you open it up and it has a bearing plate on the spring guide and a bearing inside the piston... you can remove the bearing and the 2 plates on the piston side and it will most likely drop under 400 fps without needing a new spring.

If you have no bearing on the spring guide, you can't do this and you need a 110 spring.

edit: I really doubt you have 2 bearings though... since the ctac is more likely a marked up CYMA or JG g36.

September 22nd, 2013, 21:06	#5
lurkingknight "bb bukakke" KING! Trader rating Join Date: Jul 2011 Location: Ottawa	more than likely a 120 spring with a bit of an air leak. If you open it up and it has a bearing plate on the spring guide and a bearing inside the piston... you can remove the bearing and the 2 plates on the piston side and it will most likely drop under 400 fps without needing a new spring. If you have no bearing on the spring guide, you can't do this and you need a 110 spring. edit: I really doubt you have 2 bearings though... since the ctac is more likely a marked up CYMA or JG g36. __________________ I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know. Last edited by lurkingknight; September 22nd, 2013 at 21:09..