Quote:
Originally Posted by KindT
Ok. So I have check all of the above issues and still nothing...
Springs seem to be in the correct position (I don't have a working one to compare it to)
The roller is working nicely.
One thing I did notice is that I can put a mag in the lower receiver, and fire it with only a quick pft. I expected it to vent the hole mag. I re-disassembled the trigger group and the spring that pushes the hammer forward appears to be ok and not bent or broken.
|
That sounds like a knocker pin or carrier indeed.
Also source and try new hammer springs. I had to swap mine after a year or so, I was getting light strikes.
As mentioned, check for a worn or cracked striker lock/disconnector. It's the silver part that always fall out when you remove the trigger pack from the receiver