Airsoft Canada - View Single Post

justasgoodbwoi · May 23rd, 2020, 02:35

Hi all,

I am looking for a bucking or tensionner upgrade on my Umarex VFC g19x. currently the stock bucking will not hold BBs, i did put a maple bucking in but its the same issue, BBs still fall but with a slight shake now.

Cranking the hop up a bit fixes the issue but id prefer not always having tension on the said bucking all the time. For the moment i placed a small plastic piece of like 1mm under the tensionner to fix the issue. The plastic could fall appart at anytime.

Are there upgrades that would be a permanent fix to that issue?

Thanks in advance.

May 23rd, 2020, 02:35	#1
justasgoodbwoi Trader rating Join Date: May 2020 Location: Quebec, Canada	VFC g19x bucking/tensionner upgrade? Hi all, I am looking for a bucking or tensionner upgrade on my Umarex VFC g19x. currently the stock bucking will not hold BBs, i did put a maple bucking in but its the same issue, BBs still fall but with a slight shake now. Cranking the hop up a bit fixes the issue but id prefer not always having tension on the said bucking all the time. For the moment i placed a small plastic piece of like 1mm under the tensionner to fix the issue. The plastic could fall appart at anytime. Are there upgrades that would be a permanent fix to that issue? Thanks in advance.