Airsoft Canada - View Single Post - Going to "tackle" a unfamiliar gun (A&K Mk43) with unsure issue

ccyg8774 · December 17th, 2013, 21:02

Update:
Problem solved after replacing the piston. Fires at 380 FPS with a Element M95 spring. (which is meant to shoot at 370-390 FPS despite it saying M95)
Find out the gear set is actually SHS 13:1. Installed an SHS delayer to prevent feeding problem under high ROF.
Then added the MOSFET and switched to no bouncing microswitch, also rewired the main wire with 16AWG wire. The "AUTO" set of the box magazine do not like the MOSFET. The "Continum" works fine. Built a tail switch for the box magazine and wired the magazine so the switch will work with "AUTO".
All problem solved. Thank you guys for the help.

December 17th, 2013, 21:02	#10
ccyg8774 Trader rating Join Date: Jun 2012 Location: Brampton, ON	Update: Problem solved after replacing the piston. Fires at 380 FPS with a Element M95 spring. (which is meant to shoot at 370-390 FPS despite it saying M95) Find out the gear set is actually SHS 13:1. Installed an SHS delayer to prevent feeding problem under high ROF. Then added the MOSFET and switched to no bouncing microswitch, also rewired the main wire with 16AWG wire. The "AUTO" set of the box magazine do not like the MOSFET. The "Continum" works fine. Built a tail switch for the box magazine and wired the magazine so the switch will work with "AUTO". All problem solved. Thank you guys for the help. __________________ Last edited by ccyg8774; December 17th, 2013 at 21:45..