https://www.youtube.com/watch?v=56PvtAqacz8
http://wiki.radioreference.com/index..._channel_chart
1) Turn radio on
2)make sure its set to frequency mode
3)print of the list of frequency
4) pick a frequency you want to save ( for example channel 1 on cheap radios everyone uses is 462.5625 mhz)
5) type in the frequency you plan on saving
6) once frequency is typed in hit "menu" button
7)then hit number 27 (This will take you to the spot were you save the frequency to a channel#
8)after you hit 27 hit "menu" again. Now if your saving frequency I showed in the example that frequency is what channel 1 is on cheap radios so I would advise seting that one to channel 1
9) once you found your channel hit "menu" again and you should hear "Receiving memory" when you hear that that hit "menu" again it should now say "Transmitting memory" now hit exit
this worked for me so hope it helps
There you go you have just manually programed one channel now only ton more to go