Airsoft Canada - View Single Post

Rage 01 · April 9th, 2014, 19:44

I have a sig saucer P226 that is acting up.
I put a fresh mag (bb's and green gas) I cock it and it will shoot the first BB with no problem. But it seems that the hammer is not coming all the way back for the next shot. So I pull the trigger again and no bb, the hammer goes half way back after going forward.

Any idea what could be the problem?
I replaced the piston head and the spring, lubed everything including the slide. What am I missing?

Thank you.

April 9th, 2014, 19:44	#1
Rage 01 Trader rating Join Date: Feb 2013 Location: Calgary	KLW Sig Saucer P226 I have a sig saucer P226 that is acting up. I put a fresh mag (bb's and green gas) I cock it and it will shoot the first BB with no problem. But it seems that the hammer is not coming all the way back for the next shot. So I pull the trigger again and no bb, the hammer goes half way back after going forward. Any idea what could be the problem? I replaced the piston head and the spring, lubed everything including the slide. What am I missing? Thank you.